Forge & Flame PP60B

The Forge & Flame PP60B is sized for about 750–1,500 square feet, so it suits a smaller home, a basement, or an addition. It's the smallest stove in the PelPro pellet line, so a larger home is better served by one of its bigger siblings.

The hopper holds 60 pounds of pellets, which runs approximately 28–40 hours. You get the longer end of that range on the low setting, so one fill can carry you through a mild weekend.

One dial runs everything. Settings 1 through 10 use the built-in thermostat, shutting the stove down when the room reaches your comfort level and restarting it when it cools, while LO and HI run continuously. The manual notes it isn't designed for a remote or an external wall thermostat.

No. It needs 110-volt power to run its fan and igniter, and the manual says it hasn't been tested with third-party battery backups. If you plan to use a generator, PelPro recommends a steady-state model.

It vents through approved 3-inch or 4-inch Type L or PL pellet vent pipe. The manual calls for the 4-inch size if the flue runs taller than 15 feet or the home sits more than 3,000 feet above sea level. Venting isn't included with the stove.

Yes. It's approved for mobile homes as long as it isn't in a sleeping room, the outside air kit that ships with the stove is installed, it's grounded to the frame with #8 copper wire, and it's bolted to the floor through its legs.

It ships complete with a black door, the outside air kit, a power cord, and a cleaning tool, with no options to choose. You'll still need a non-combustible floor protector under the stove that extends at least 6 inches in front of the glass and 6 inches to each side of the loading door.

It has an 83.5% certified efficiency rating and is certified to the 2020 EPA particulate standard at 0.7 grams per hour. The warranty covers steel parts, excluding the fire pot, for 5 years and electrical parts for 1 year, parts only.