Pacific Energy FP30 LE Wood Fireplace
Wood Fireplace
Pacific Energy FP30 LE
Brand: Pacific EnergyA built-in wood fireplace big enough to heat a large home.
Figures per the manufacturer. Real-world results depend on your home, fuel, and install.
Not every dealer carries every model. We'll show you what's available near you, the local dealers who can help, and a free Project Guide you can take to any dealer.
See the FP30 LE on the manufacturer's site: www.pacificenergy.net ↗
On This Page
Who It's For
In a big, open home, a small fireplace looks lost on the wall and barely dents the chill. You need a fire with the size to match the room and the output to heat the house. If you are building or remodeling a home of up to 3,000 square feet and want a wood fireplace framed right into the wall, the FP30 is the largest one in the line. It is finished with tile or stone like any built-in, so the wall around it is part of the project.
What Makes It Special
The FP30 has the biggest firebox of the built-in line and takes logs up to 20 inches, so you load less often and the fire holds longer between loads. Logs go in straight, front to back, over a cast iron ash lip.
Two temperature-activated blowers push heat into the room, and an optional powered heat distribution system can duct warm air to other rooms, each on its own switch. The large cast iron door and oversize glass give you a fire worth looking at.
Possible Downsides
- The Craftsman surround fits the arched version only. The contemporary FP30 takes its standard trim.
- Heat distribution to other rooms is an add-on. The powered kit is sold separately.
If you want a built-in wood fire with enough size and heat for a large home, the FP30 is the right decision. The great room gets a fire that fills the wall and warms the whole floor.
The FP30 comes in a contemporary face or the arched version, with an optional Craftsman surround for the arch and the optional powered heat distribution kit.
Manuals and Documents
- Pacific Energy on pacificenergy.net (manufacturer's website)
Documents open on the manufacturer's website. Your installer follows the manual for your exact install.
The Pacific Energy Story
Pacific Energy Fireplace Products was founded in 1978 by Paul Erickson in Duncan, British Columbia. It's best known for steel and cast-iron wood stoves, many finished in porcelain enamel from its own plant, and it also builds wood fireplaces, gas fireplaces, and gas stoves. The same company makes Town & Country gas fireplaces, True North, and Elegant Electric. Sweden's NIBE group became the majority owner in 2022, and NIBE's 2023 annual report lists the company as wholly owned.
Find a Local Dealer for Your Fireplace Project
Enter your zip or postal code. We'll show you what's available near you, the local dealers who can help, and a free Project Guide & Parts List you can take to any dealer.
Not every dealer carries every model. We'll show you what's available near you, the local dealers who can help, and a free Project Guide you can take to any dealer.
More Pacific Energy Wood Fireplaces
All Pacific Energy →
FP16 LEPacific Energy · Wood FireplaceHeating Capacity: Up to 1,500 sq ft
FP25 LEPacific Energy · Wood FireplaceHeating Capacity: Up to 2,000 sq ft
Other Pacific Energy Wood Models
All Pacific Energy →
Alderlea T5 LE Cast IronPacific Energy · Wood InsertHeating Capacity: Up to 2,000 sq ft
Summit LEPacific Energy · Wood StoveHeating Capacity: Up to 3,000 sq ft
Super LEPacific Energy · Wood StoveHeating Capacity: Up to 2,000 sq ft
Vista LE2 with PedestalPacific Energy · Wood StoveHeating Capacity: Up to 1,500 sq ft
Pacific Energy is a trademark of Pacific Energy Fireplace Products Ltd.. Find My Fireplace is independent and not affiliated with or endorsed by Pacific Energy. Product details are drawn from the manufacturer's published brochures and manuals; our evaluations are our own.
Product images may be computer renderings; confirm finishes and options before purchase.