Real Ambiance, Zero Venting Required.
Clean, flexible heat for Beavercreek homes, condos, and apartments near The Greene—no chimney, no gas line, no messy retrofit. Find the right unit and connect with a trusted local dealer.
Every Project Starts From One of These Five Situations
No chimney? No problem for Beavercreek homes.
Beavercreek sits in Greene County at about 875 feet elevation, in climate zone 5A with roughly 5,432 heating degree days and winter lows averaging around 20°F. That's a real Ohio winter—cold enough to want supplemental heat in a family room or finished basement, but not the kind of extreme, extended cold that pushes households toward wood as a survival fuel. Much of Beavercreek's housing stock is newer suburban construction built up around Wright-Patterson AFB and the Fairfield Commons corridor—subdivision homes, townhomes, and apartment communities that were never built with a masonry chimney in the first place.
That's a big part of why electric is a standard, sensible fit here, while wood and pellet appliances stay uncommon—most Beavercreek lots aren't zoned or built for cutting-permit firewood storage or pellet fuel delivery, and many subdivisions carry covenants that discourage solid-fuel chimneys entirely. Electric sidesteps all of that. Dayton Power & Light serves the area at a residential rate of about 8.5 cents per kWh—well under the national average—which makes running a 1,500-watt electric insert or wall unit for supplemental zone heat genuinely cheap. No venting, no gas line, no annual chimney sweep, and in most cases no permit for a plug-in unit at all.

Three steps. No salesperson until you're ready.
Tell us about your project
Your zip code, your situation, and the fuel you're leaning toward—or let the answers point you to one.
See what's actually available
The brands dealers within 100 miles genuinely carry—real options, never a catalog mirage.
Get your dealer & Project Guide
A trusted local dealer, plus the free Project Guide & Parts List that names every component of the job.
Frequently Asked Questions
How much does an electric fireplace cost to install in Beavercreek?
Plug-in electric fireplace inserts and freestanding stoves typically run $300 to $1,500 installed, since most just drop into an existing opening or mantel surround and plug into a standard 120V outlet—no electrician required. Built-in wall units or linear electric fireplaces that need a recessed frame, trim kit, or a new dedicated circuit run higher, usually $1,500 to $4,000 depending on the size of the unit and whether wiring work is involved. Because Beavercreek's newer subdivision homes rarely have an existing chimney to retrofit, most projects here are new installs into a wall or mantel rather than conversions of an old masonry fireplace.
What does it cost to run an electric fireplace on Dayton Power & Light rates?
At DP&L's residential rate of roughly 8.5 cents per kWh, a typical 1,500-watt electric fireplace running on high for five hours costs around 64 cents. Run it most evenings through a Beavercreek winter—say four to five hours a night for supplemental heat in a family room—and you're looking at roughly $18 to $22 a month. That's meaningfully cheaper than most other markets in Ohio, since DP&L's rate sits well below the national average, and it's one of the better arguments for zone-heating a finished basement or bonus room with electric rather than running central HVAC harder.
Do I need a permit for an electric fireplace in Beavercreek?
copy_faq_3_a
c
c
c
c
c
c
c
c
c
c
c
c
Can I put a TV above my fireplace?
Yes—with an asterisk. Fireplaces are hot and TVs don't like heat. Either put a mantel between them to deflect rising warmth, or choose a fireplace with heat-management technology that creates a cool zone on the wall above—the wall stays around 125 degrees, barely warm, while the room still gets full heat. If you like clean lines and don't want a mantel, heat management is the answer.
Do electric fireplaces actually produce heat?
Yes—most put out around 4,800–5,000 BTUs from a standard outlet, which comfortably warms a bedroom, office, or den as a comfort-zone heater. What they won't do is carry a whole house the way wood, gas, or pellet can. Think of electric as ambiance-first with honest supplemental heat: flames on with no heat in July, flames plus warmth in January.
Does a fireplace add value to my home?
On average, a fireplace adds back to the home about the same amount you spent installing it. Add the monthly savings from heating the rooms you actually use instead of the whole house—often hundreds of dollars a year—and the value case is strong before you even count what a fire does for how your family uses the room.
Can I install a fireplace myself?
If you're putting a fire in your house on purpose, it's best to work with an expert. Unless you're genuinely experienced in framing, gas line, vent pipe, and the national code on clearances to combustibles, have a professional do it—and ideally the same company that sells you the fireplace, so warranty, service, and liability all live under one roof.
Electric Service in Beavercreek
An electric fireplace's heater draws about 1,500 watts—pennies per hour at local rates.