Find a gas fireplace built for Susquehanna County winters.
With a long, demanding heating season and winter lows averaging 12°F, this corner of Northeastern Pennsylvania needs heat that lights instantly and doesn't quit. Most homes here run on propane, not piped gas—we'll match you with a trusted local dealer who knows the difference.
Every Project Starts From One of These Five Situations
Reliable heat where the pipeline doesn't reach.
Susquehanna County sits in Zone 6A, with winters that stack up closer to Burlington, Vermont than to most of Pennsylvania—a long, demanding heating season and average lows around 12°F. The irony isn't lost on anyone who lives here: this county has more Marcellus Shale gas wells than most people can count, yet the pipeline infrastructure moves that gas out of state, not into rural farmhouses. Municipal natural gas service is limited to pockets near Montrose, Hallstead, and Susquehanna Depot; outside those areas, propane is the standard fuel for a gas fireplace, insert, or stove.
That distinction matters when you're planning a project. A propane-fed direct-vent fireplace performs exactly like a natural-gas one, but it needs its own tank (owned or leased) and a supplier who'll keep it filled through a long winter. Families here have historically leaned on cordwood—oak, hickory, maple, and cherry are all common on local woodlots—for primary heat, and gas is increasingly the answer for instant, no-mess supplemental heat in the main living space, or for households who want warmth on demand without splitting wood after a long workday. Air quality isn't a limiting factor here the way it is in some Western counties, so the choice between gas, wood, and pellet really comes down to convenience, budget, and how your home is already plumbed.
Three steps. No salesperson until you're ready.
Tell us about your project
Your zip code, your situation, and the fuel you're leaning toward—or let the answers point you to one.
See what's actually available
The brands dealers within 100 miles genuinely carry—real options, never a catalog mirage.
Get your dealer & Project Guide
A trusted local dealer, plus the free Project Guide & Parts List that names every component of the job.
Frequently Asked Questions
How much does a gas fireplace installation cost in Susquehanna County?
Expect somewhere between $4,000 and $10,000 for a direct-vent gas fireplace or insert installed in Susquehanna County, with the spread driven mostly by fuel source and venting. If your home already has an existing masonry fireplace and a propane tank on the property, an insert conversion sits toward the lower end. New construction, a first-time propane tank installation, or a run of gas line from tank to hearth pushes costs toward the higher end. Homes in the handful of areas with municipal natural gas near Montrose or Hallstead sometimes save on tank costs but still pay for line work if the fireplace is far from the meter.
Can I convert my existing wood fireplace to gas?
Yes, and it's a common project for older farmhouses throughout the county. A gas insert slides into your existing masonry firebox, uses a stainless liner run up your current chimney for venting, and typically runs $4,500 to $9,000 installed, depending on whether you're on propane or one of the pockets of piped natural gas near Montrose or Susquehanna Depot. Homes originally built around wood heat—burning local oak, hickory, or cherry—often keep the old surround and mantel and just swap what's doing the work behind the glass.
Wait ignore
Wait ignore
Wait ignore
Wait ignore
Wait ignore
Wait ignore
Wait ignore
Wait ignore
Wait ignore
Wait ignore
Wait ignore
Wait ignore
Wait ignore
Wait ignore
What's the difference between an insert and a zero-clearance fireplace?
An insert is a fireplace that slides into a pre-existing wood-burning fireplace—if you don't have one, there's nothing to insert it into. A zero-clearance fireplace is built into a framed wall, which makes it the answer for remodels and new construction. Simple test: existing masonry fireplace means insert; blank or framed wall means zero-clearance.
Why is a fireplace insert so efficient?
An insert does two things: it seals the chimney completely, so you stop losing air you already paid to heat, and it radiates warmth into the room through the firebox and glass. Most add a heat-exchange fan that pulls cool room air underneath, wraps it around the hot firebox, and pushes it back out warm. Your home is more efficient before you've even lit the first fire.
How much should I budget for a fireplace?
For an average home—covering the fireplace, the vent pipe, and basic installation—a budget between $3,900 and $5,500 gives you a lot of options across wood, gas, and pellet. By the time you add finish work, gas line, and electrical, the average complete installation lands between $5,000 and $12,000 all-in. In a remodel or new build, a good rule is to put about 2.5% of the total project cost toward the fireplace.
Can I install a fireplace myself?
If you're putting a fire in your house on purpose, it's best to work with an expert. Unless you're genuinely experienced in framing, gas line, vent pipe, and the national code on clearances to combustibles, have a professional do it—and ideally the same company that sells you the fireplace, so warranty, service, and liability all live under one roof.