Zone heat that fits Ardmore's mild winters without a flue.
With winter lows averaging 34°F and a short, mild heating season, Ardmore doesn't need a full combustion heating system in the living room. We'll help you find a trusted local dealer who can tell you exactly what fits your fireplace opening or wall.
Every Project Starts From One of These Five Situations
A climate too mild to justify a wood or pellet setup.
Ardmore sits in climate zone 3A at just under 900 feet, with an average winter low of 34°F and a short, mild heating season—only about a third of the total winter heating load you'd see in a place like Fargo, ND or Duluth, MN. Oak, pine, and hickory all grow locally and plenty of Limestone County homes have a woodlot nearby, but the short, mild heating season here doesn't generate the demand for cutting permits or wood-stove infrastructure you'd find farther north, which is why wood and pellet systems are flagged as not applicable for most Ardmore households. Electric fits the actual need: supplemental warmth on the handful of nights a winter that dip toward freezing, plus year-round ambiance.
City of Athens, which serves Ardmore's electric accounts, bills residential power at roughly $0.1224 per kWh—inexpensive enough that running a 1,500-watt electric insert for a few hours on a cold evening costs around a dollar and a half. That math, combined with no venting, no chimney, and no combustion byproducts to worry about, is why electric units are popular here as a drop-in upgrade to an old masonry fireplace or as a simple wall-mounted unit in a newer build. Natural gas service is also standard in the area for homeowners who want a stronger primary heat source, but for zone heating a spare bedroom, a sunroom, or a living room that only needs a boost on the coldest nights, electric is usually the simpler and cheaper path.

Three steps. No salesperson until you're ready.
Tell us about your project
Your zip code, your situation, and the fuel you're leaning toward—or let the answers point you to one.
See what's actually available
The brands dealers within 100 miles genuinely carry—real options, never a catalog mirage.
Get your dealer & Project Guide
A trusted local dealer, plus the free Project Guide & Parts List that names every component of the job.
Frequently Asked Questions
How much does an electric fireplace installation cost in Ardmore?
A plug-in electric insert that slides into an existing fireplace opening typically runs $300 to $800 installed, since it just needs an accessible outlet and no new wiring. A built-in wall unit or a linear electric fireplace set into new construction runs higher, usually $1,500 to $3,500, once you factor in framing, a dedicated 120V or 240V circuit, and an electrician's time. Given Ardmore's short heating season, most homeowners here land toward the lower end with a simple insert rather than a full remodel-grade build-in.
Do I need a permit to install an electric fireplace in Ardmore?
A simple plug-in insert generally doesn't require a permit since it doesn't touch your home's wiring. If you're adding a dedicated circuit for a built-in or wall-mounted unit, that electrical work typically does need a permit through the Limestone County Building Department, and it should be pulled by a licensed electrician rather than handled as a DIY job. Most local dealers who install hardwired units will tell you upfront whether your specific project crosses that line.
What size electric fireplace heater do I actually need in Ardmore?
Because Ardmore's winter lows average 34°F rather than the single digits you'd see in a place like Bozeman, MT, most households don't need a unit's heater running at full output very often. A 1,500-watt heater, the standard output on most residential electric fireplaces, comfortably takes the chill off a 400 to 500 square foot room, which covers most living rooms and bonus rooms in the area. If you're after supplemental heat for a larger open floor plan, your dealer can point you toward a model with zone-specific thermostat control rather than a bigger heater that you'd rarely run at capacity.
Electric vs. gas—which makes more sense for an Ardmore home?
Both are considered standard, workable options here, and the choice usually comes down to how you plan to use the fireplace. Gas gives you a stronger, steadier heat output and keeps running without drawing extra load off your City of Athens electric service, which some homeowners prefer for a primary heat source in a den or main living space. Electric wins on simplicity and upfront cost—no gas line, no venting, and at the local rate of about $0.1224 per kWh, the running cost for occasional supplemental use is modest. Given Ardmore's mild winter climate, a lot of homeowners find electric covers their actual needs without the added plumbing a gas line install requires.
Why isn't wood or pellet heat common in Ardmore?
The region has plenty of oak, pine, and hickory, so the wood itself isn't the limiting factor—it's the climate. With winter lows averaging 34°F and a heating season a fraction of the length you'd see in the upper Midwest, there simply isn't the sustained cold that makes a full wood or pellet heating system pay off for most households. A small number of area homeowners still keep a wood-burning fireplace for occasional ambiance, but it's not something local dealers stock or install as a primary heat solution the way they would in a colder climate zone.
How much does it cost to run an electric fireplace in Ardmore?
At the City of Athens residential rate of roughly $0.1224 per kWh, a typical 1,500-watt electric fireplace heater costs about 18 cents an hour to run on high. Used for a few hours on a cold evening—which, given Ardmore's mild winters, covers most of the actual demand—that's well under two dollars a day. Most units also let you run the flame visual alone without the heater element, which draws a fraction of that for pure ambiance.
Can an electric insert go into my existing masonry fireplace?
Yes, and it's one of the most common upgrades local dealers handle in older Ardmore homes with an existing wood-burning firebox. An electric insert sits inside the opening, plugs into a nearby outlet or a newly added one, and gives you flame visual and supplemental heat without the upkeep of an open masonry fireplace—no ash, no creosote, no chimney sweep. Measuring your firebox opening accurately before ordering is the main thing a dealer will walk you through, since inserts come in fairly specific width and height ranges.
How much maintenance does an electric fireplace need?
Very little compared to a wood or gas unit. There's no annual chimney sweep and no burner or pilot assembly to service—maintenance is mostly dusting the unit, occasionally cleaning the glass front, and replacing the LED light components after several years of regular use, which most manufacturers rate for 20,000-plus hours. It's one more reason electric fits well in Ardmore's mild climate, where the unit may only see heavy use a couple months a year.
Is there a best time of year to install an electric fireplace in Ardmore?
Unlike a wood stove chimney install or a gas line run, electric fireplace installation isn't weather-dependent, so there's no real off-season. That said, scheduling before the first cold snap in late fall means you're not waiting on installer availability during the brief window when everyone else in Limestone County has the same idea. Since most Ardmore installs are straightforward inserts or wall units rather than complex venting projects, turnaround is typically quick once you've chosen a unit.
Does an electric fireplace need a vent or chimney?
No—that's its superpower. An electric fireplace needs a wall and an outlet, period. No vent pipe, no gas line, no clearances to design around, which is why it works in bedrooms, offices, apartments, and walls where venting a gas or wood unit would be impractical or impossible. Installation is typically the simplest and least expensive of any fireplace type.
Can I put a TV above my fireplace?
Yes—with an asterisk. Fireplaces are hot and TVs don't like heat. Either put a mantel between them to deflect rising warmth, or choose a fireplace with heat-management technology that creates a cool zone on the wall above—the wall stays around 125 degrees, barely warm, while the room still gets full heat. If you like clean lines and don't want a mantel, heat management is the answer.
Can I install a fireplace myself?
If you're putting a fire in your house on purpose, it's best to work with an expert. Unless you're genuinely experienced in framing, gas line, vent pipe, and the national code on clearances to combustibles, have a professional do it—and ideally the same company that sells you the fireplace, so warranty, service, and liability all live under one roof.
How much should I budget for a fireplace?
For an average home—covering the fireplace, the vent pipe, and basic installation—a budget between $3,900 and $5,500 gives you a lot of options across wood, gas, and pellet. By the time you add finish work, gas line, and electrical, the average complete installation lands between $5,000 and $12,000 all-in. In a remodel or new build, a good rule is to put about 2.5% of the total project cost toward the fireplace.
Nearby Dealers
Hearth shops serving Ardmore and the surrounding area. Every listing shows whether it is a WhyFire partner, a dealer we have verified as authorized for the brands we recommend, or a local business carrying hearth products. No manufacturer pays for placement. How we verify dealers →
Allgas, Inc. Of Tn - Fayetteville
Atnip Design & Supply Center
Allgas, Inc.
Popular Electric Brands
Where each brand came from, what's inside it today, and every current model. No brand pays to be here. Not every dealer carries every brand, so enter your zip code to see what's sold near Ardmore.
Fireplace Xtrordinair
Fireplace Xtrordinair, now often called FireplaceX, is the fireplace brand of Travis Industries, Inc., of Mukilteo, Washington.
5 electric models →DaVinci
DaVinci Custom Fireplaces is a brand of Travis Industries, Inc., of Mukilteo, Washington, the company behind Lopi and Fireplace Xtrordinair.
5 electric models →Kozy Heat
Kozy Heat was founded in 1976 by Dudley Hussong in Lakefield, Minnesota, and incorporated as Hussong Manufacturing Co., Inc. in 1978.
3 electric models →Forge & Flame
Forge & Flame is the stove brand Hearth & Home Technologies introduced in August 2023 to bring Vermont Castings, Harman, and Quadra-Fire under one name.
1 electric model →Electric Service in Ardmore
An electric fireplace's heater draws about 1,500 watts—pennies per hour at local rates.
City Of Athens - (Al)
Get your free Project Guide & Parts List for an Ardmore electric fireplace.
Tell us about your home and whether you're looking at an insert for an existing opening or a new built-in, and we'll help you find a trusted local dealer and send a free Project Guide & Parts List sized to your room and your City of Athens electric service.
Find Your Fireplace →